Xelivor
Xelivor
Industrial-grade components optimized for high-density networking, seamless data routing, and high-frequency gigabit signaling.
Deconstructing the structural integrity and electromagnetic shielding rules governing gigabit-over-copper networks.
Category 5e (Category 5 Enhanced) copper cabling operates up to 100 MHz bandwidth, serving as the foundational physical layer backbone for Fast Ethernet (100BASE-TX) and Gigabit Ethernet (1000BASE-T) architectures. The performance improvements of Cat5e over legacy Cat5 are achieved through tighter structural tolerances, reduced signal crosstalk, and precise parameter configurations. At Xelivor, our high-grade copper systems focus on preserving electrical stability across long transmission spans.
Critical structural elements include:
For European and global deployment, CE marking verifies that products meet safety, health, and environmental standards. Under the Construction Products Regulation (CPR) EN 50575, data communication cables installed inside permanent structures must undergo strict testing for reaction to fire.
Our Cat5e cabling solutions conform to Euroclass fire classifications (such as Eca, Dca, and Cca) and use Low Smoke Zero Halogen (LSZH) compounds. This prevents the release of toxic, acidic gases during combustion, ensuring safety in data centers, commercial high-rises, and industrial facilities.
Active networks require compatibility between cabling and termination points. High-frequency copper pathways must match clean connector points to prevent signal loss.
Our portfolio includes structural connectors like the RJ-001TC1 RJP-003TC1 Tab Down Without LEDs Cat5 Network RJ45 PCB Connector, alongside magnetic models like the HFJ12-E2450ER-L12RL Tab Down 1x2 Ports RJ45. These integrate filtering components directly into the RJ45 jack housing, protecting delicate transceivers from voltage spikes and return loss anomalies.
Modern enterprise networks rely on a combination of fiber and copper cabling. Fiber optic links manage high-capacity backbone transfers, while copper runs handle local-area connections, user terminals, and Power-over-Ethernet (PoE) hardware. Managing this hybrid physical layer is critical for network performance.
Xelivor provides hardware designed for these interfaces. For example, our 10GBASE-T SFP+ Copper Transceiver converts SFP+ slots in switches into 10-Gigabit RJ45 copper ports, extending the utility of older Cat5e runs up to 30 meters. Meanwhile, our Single Mode SFP 622M and 1.25G SFP transceivers link local distribution hubs to regional optical trunks over distances up to 120km, keeping latency low and data integrity intact.
Inside Xelivor's modern industrial facility, combining raw material access, automation, and testing.
China's manufacturing centers host a fully integrated supply chain. Our facilities operate within industrial clusters that provide rapid access to high-purity copper, specialized plastics, and automated wire-drawing equipment. These localized supply lines help lower overall production costs while maintaining quick turnaround times.
Physical cables are subjected to testing protocols using Fluke DSX CableAnalyzers. We test parameters including Near-End Crosstalk (NEXT), Return Loss, attenuation, and shielding continuity. Our quality team verifies electrical performance across all manufactured batches before they leave the factory floor.
With years of export experience, our logistics team manages shipping processes through ports like Shenzhen and Shanghai. We coordinate customs documentation and safety certificates, ensuring that our products reach network installations around the world without clearing delays.
Xelivor Optoelectronics Co., Ltd. is a manufacturer of optical transceivers and fiber connectivity solutions, serving global data center, telecom, enterprise network, and cloud computing industries. Established in 2016, the company operates from a modern manufacturing facility covering 386 m² and has built a reputation for delivering reliable, high-performance optical communication products worldwide.
With over 8 years of industry experience and 6 years of export experience, Xelivor has achieved annual export revenues exceeding USD 12 million. Our products are exported to customers across North America, Europe, Southeast Asia, the Middle East, and South America, supporting a wide range of networking applications from enterprise infrastructure to hyperscale data centers.
Deploying CE certified cabling across industrial, commercial, and enterprise systems.
Cat5e cabling is widely used for Power over Ethernet (PoE, PoE+ under IEEE 802.3af/at) installations. Solid 24 AWG bare copper wires support current loads without excessive heat build-up. This makes them suitable for powering IP surveillance cameras, wireless access points, and VoIP terminals over distances up to 100 meters.
Factory floors present high levels of electromagnetic interference (EMI) from motors, relays, and power lines. Shielded Cat5e options (F/UTP or SF/UTP), paired with integrated magnetic jacks like our J0G-0001NL 10/100/1000 Base-t Tab up RJ45, help isolate data lines and maintain signal integrity in industrial environments.
Smart building automation connects heating, lighting, security, and access control systems onto a single IP network. CE-certified Cat5e copper cables provide a cost-effective, standard-compliant medium for building-wide sensor arrays and controller modules.
Enterprise procurement teams must balance costs with regulatory compliance. When sourcing networking cables and optical components, selecting a supplier with verified certifications is essential for avoiding performance bottlenecks and meeting local building codes.
Key checkpoints for international network procurement:
Ensure cables meet the Construction Products Regulation (CPR) requirements with an official Declaration of Performance (DoP), indicating they are certified for in-wall installation.
Verify that RJ45 connectors, transceivers, and patch panels are tested together to avoid return loss issues at connection points.
Look for manufacturers that offer custom sheathing options (PVC, PE, LSZH), custom lengths, and customized labeling to match specific project requirements.
Our quality management system incorporates incoming material inspection, in-process quality control, aging tests, compatibility verification, optical parameter testing, and final product inspection. A professional quality assurance team of 32 inspectors ensures every product meets strict international standards before shipment.
The company maintains long-term cooperation with more than 850 supply chain partners, enabling stable sourcing, efficient production, and rapid delivery capabilities. Our flexible manufacturing system supports OEM, ODM, private label, customized firmware, customized labeling, and packaging services to satisfy diverse customer requirements.
Answers to common questions regarding Cat5e network designs, compatibility, and compliance standards.
Complete your physical installation with compatible SFP/SFP28 optical modules and board-mounted RJ45 interfaces.
